• <p id="p2jf8"></p>

  • 瀏覽量:



    Best-plus loom is the new high speed rapier loom which is adopted the modular design concept with simple structure, good performance, low power consumption, the abundant yarn woven and clear types. This loom is designed specially for the investor and controlled by leading level computer processing system.

    1  Main Motor

    We adopt the low energy consumption environmental SUMO motor, which uses oil circulation cooling system to lower the temperature. This main motor drives the loom instead of belt, clutch and brake disc to keep the first beating-up of the reed in order to eliminate the uneven weft density. This main motor control the speed of the loom so the speed can be easy adjusted according to the yarn quality. The electronic consumption of this loom is over 10% lower than the common clutch rapier loom.

    2 Weft Selecting

    Each weft selecting finger is moved by the stepper motor.

    The weft selecting fingers go back to the middle position to keep the tension force constant when the rapier clamps the weft yarn. The craft setting is input by the precision program on the display of the electrical box.

    3 Rapier Drive Style

    We adopt the unitary unilateral guide hook. The rapier is light enough to enter into the shed stably. It reduces the friction with the warp.

    4Auto Pick Find

    The auto pick find and slow mode is finished slowly by the SRD main motor.

    5The lifting time can be set in the display easily.

    6Lubrication System

    The bearing is lubricated by the oil of Lubricating System with the oil-temperature and oil-pressure sensor. The bearing of beating-up shaft is oiled by the centralized manual oil filler.

    7The Warp Tension

    Take up and run in device is droved by servo motor. The signal of warp tension sensor keeps warp tension force.

    8Electronic dobby may take 20 pieces of heald frames

    9 Electronic selvage

    The leno selvage is droved by the pendent stepper motor instead of two heald frames.

    10Yarn Woven

    Discontinuous yarns: Nm200-Nm3

    Continuous yarns: 22den-3000den (25dtex-3300dtex)

    11 Firm structure and modular design

    Two sides van cast iron panels are connected by two beams. This firm structure eliminates the mechanic parts vibration and keep the rapier loom working stably in high speed.

    12 Timely effective satisfied technical assistance

    There are 3 Maintenance Service Centers to keep 7*24 hours after-sale service for our rapier looms. Besides, we set up hot-line 0635-8883786 to support our technical assistance.


    Reed Width

    190,210,230,260,280,320, 340,360,380cm

    Run in device

    positive electronic run in device

    Max width reduction

    35cm each side

    Diameter of beam




    Back rest

    single and double back rest




    independent electronic  selvage

    Weft density

    130picks/cm,can be adjusted by yarns woven

    Warp stop device

    6 lines of electronic droppers

    Yarns woven

    Discontinuous yarn: Nm200-Nm3(Ne120-Ne1.8)

    Take up device

    positive electronic take up device

    Continuous yarn: 22den-3000den(25dtex-3300dtex)

    Loom drive

    Super SRD main motor driving

    Weft selecting

    1-8 color, every weft selecting finger is moved by the stepper motor.

    Pick finding

    auto pick finding

    Weft control

    anti-double wefts function

    Control system

    controlled by computer with clear LCD and humanity design


    two sides' conjugate cam


    booster circulation and filtration system

    Shed formation

    Staubli electronic dobby






  • <p id="p2jf8"></p>